Skip to content
DRIZORO
Contact Us
Joint Sealants

MaxJoint® Elastic

Elastic Mortar For Sealing Joints And Cracks Subject To Movement In Concrete And Masonry

Pack
  • Two ComponentsA: 5 KG PAILB: 10 KG PAIL
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Elastic Mortar For Sealing Joints And Cracks Subject To Movement In Concrete And Masonry
Applications
Precast Concrete Joints Sealing, Pipelines Joints Sealing
Color
Grey / White
Coverage
Approx. 0.125 kg per linear metre for a 10 × 10 mm joint. One kilogram fills about 0.79 litres of joint volume.

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxJoint® Elastic is a two-component product. Component (A) is a liquid based on special synthetic resins. Component (B), supplied in powder form, is a mortar based on a mixture of cements, additives, and special aggregates. When both components are mixed, an elastomeric product with high bond strength is achieved, suitable for sealing joints and cracks in concrete, pre-cast elements, mortars, and
masonry.

Technical Data Sheet

ParameterValue
Product TypeElastic Mortar For Sealing Joints And Cracks Subject To Movement In Concrete And Masonry
Container Type & SizeTwo-component A: 5 KG PAIL B: 10 KG PAIL
ColorGrey / White
Product Color OptionsIvory / Yellow / Blue / Tile / Red / Jade Green / Brown / Black
ConsumptionApprox. 0.125 kg per linear metre for a 10 × 10 mm joint. One kilogram fills about 0.79 litres of joint volume.

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • CE Marking, EN 15651-1 — Sealant for façade elements, type F INT-EXT, class 7.5P. Test standards: EN ISO 868 (Shore A hardness) · EN 28339 (tensile strength, secant modulus and elongation at break) · EN 27389 (elastic recovery). Suitable for contact with drinking water per Directive (EU) 2020/2184 and Spanish RD 3/2023.

How to Apply

How to Apply
Mix components A and B at a 1:1 ratio by weight using a low-speed drill for 2–3 minutes, let the mix rest for 5 minutes, then apply by trowel or gun onto a damp surface, filling the joint completely and smoothing as required.

Packaging

Two-component A: 5 KG PAIL B: 10 KG PAIL