Skip to content
DRIZORO
Contact Us
MaxElastic® PUR BIT
Waterproofing Systems

MaxElastic® PUR BIT

Bitumen-Polyurethane Elastomeric Membrane For Waterproofing

Pack
  • 25 KG PAIL
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Bitumen-Polyurethane Elastomeric Membrane For Waterproofing
Applications
Roofs Waterproofing, Terraces Waterproofing
Color
Black
Coverage
0.5–0.9 kg/m² per coat — 1.0–1.8 kg/m² in two coats. On vertical surfaces, 0.3 kg/m² per coat to avoid slumping.

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxElastic® PUR BIT is a one-component, liquid
product ready to use, based on bitumen-polyurethane
resin that provides a protective waterproofing
elastomeric membrane for suitable for concrete and
cement-based mortar substrates.

Technical Data Sheet

ParameterValue
Product TypeBitumen-Polyurethane Elastomeric Membrane For Waterproofing
Container Type & Size25 KG PAIL
ColorBlack
Consumption0.5–0.9 kg/m² per coat — 1.0–1.8 kg/m² in two coats. On vertical surfaces, 0.3 kg/m² per coat to avoid slumping.

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • CE Marking, EN 1504-2 — Polyurethane coating for protection of concrete against ingress of water and CO₂, Coating (C).
  • Principles/Methods: 1-PI/1.3, 2-MC/2.2
  • ASTM C-836 · EN ISO 7783-1/-2 (Class II) · EN 1062-3 (W3) · EN 1062-6 · EN 1542 · EN ISO 868-3

How to Apply

How to Apply
Supplied ready to use; stir with a slow-speed drill (400–600 rpm) until a homogeneous paste is obtained. On porous substrates the first coat may be thinned with 5–10 % MAXSOLVENT®; where the substrate has residual moisture, prime with MAXEPOX® PRIMER-W at 0.2–0.3 kg/m². Apply by brush, roller, rubber squeegee or airless spray in two coats, leaving 8–12 hours between coats until tack-free. Reinforce corners, joints and cracks by embedding DRIZORO® VEIL E-60 polyester veil between two 0.9 kg/m² coats. Allow 7 days curing at 20 °C before permanent water immersion.

Packaging

25 KG PAIL