
Find the right product for your project

Liquid Admixture To Improve Bonding, Workability And Curing Of Mortar And Concrete
Presented by FIAN GROUP within the scope of its commercial relationship with DRIZORO. Please refer to the official technical specifications and application guidelines before use. Legal Disclaimer
MaxCryl® is a water-based pure acrylic product to be used as an admixture to increase both physical and chemical properties of cement-based mortars and concrete. The fresh mixes prepared with MaxCryl®, provide greater adhesion, workability, cohesion and water retention. Once hardened, MaxCryl® improves the mechanical resistances to compressive and flexural strength, enhances abrasion and wearing resistance, and provides a reduction of water absorption by capillarity.
Technical Data Sheet
| Parameter | Value |
|---|---|
| Product Type | Liquid Admixture To Improve Bonding, Workability And Curing Of Mortar And Concrete |
| Container Type & Size | 25 KG PAIL |
| Color | Transparent Milky Liquid |
| Consumption | As a primer: 0.1–0.2 litre/m² per coat. As an admixture: dilution ratio between 1:2 and 1:3 with water, depending on the application. |
Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.
Reference Standards

