Skip to content
DRIZORO
Contact Us
MaxCryl®
Integral Waterproofing (Admixtures)

MaxCryl®

Liquid Admixture To Improve Bonding, Workability And Curing Of Mortar And Concrete

Pack
  • 25 KG PAIL
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Liquid Admixture To Improve Bonding, Workability And Curing Of Mortar And Concrete
Applications
Smooth Surfaces Adhesion Improvement, Curing Process Improvement
Color
Transparent Milky Liquid
Coverage
As a primer: 0.1–0.2 litre/m² per coat. As an admixture: dilution ratio between 1:2 and 1:3 with water, depending on the application.

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxCryl® is a water-based pure acrylic product to be used as an admixture to increase both physical and chemical properties of cement-based mortars and concrete. The fresh mixes prepared with MaxCryl®, provide greater adhesion, workability, cohesion and water retention. Once hardened, MaxCryl® improves the mechanical resistances to compressive and flexural strength, enhances abrasion and wearing resistance, and provides a reduction of water absorption by capillarity.

Technical Data Sheet

ParameterValue
Product TypeLiquid Admixture To Improve Bonding, Workability And Curing Of Mortar And Concrete
Container Type & Size25 KG PAIL
ColorTransparent Milky Liquid
ConsumptionAs a primer: 0.1–0.2 litre/m² per coat.
As an admixture: dilution ratio between 1:2 and 1:3 with water, depending on the application.

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • N/A — liquid admixture, not covered by EN 1504-2/-3 CE marking.

How to Apply

How to Apply
Apply undiluted as a primer onto a clean, saturated substrate, or diluted with water according to the intended use. When used as an admixture, mix mechanically with the mortar until a homogeneous mix is obtained, then apply according to the chosen system.

Packaging

25 KG PAIL