Skip to content
DRIZORO
Contact Us
MaxRest® Passive
Anti-Corrosion

MaxRest® Passive

Oxide Converter And Anti-Corrosion Protection For Reinforcing Bars And Other Iron Or Steel Surfaces

Pack
  • 1 Litre JERRY CAN
  • 5 Litre JERRY CAN
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Oxide Converter And Anti-Corrosion Protection For Reinforcing Bars And Other Iron Or Steel Surfaces
Applications
Reinforcement Corrosion Treatment, Reinforcement Protection
Color
Grey
Coverage
0.15 kg/m² per coat — 0.30 kg/m² for two coats

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxRest® Passive is a one-component liquid product, ready to use as an oxide converter and protective coating of steel reinforcements, and other steel and iron surfaces against corrosion. MaxRest® Passive once applied, neutralizes the corrosion process, reacting quickly with the rust and transforms the iron oxide into a stable passive coating, providing a full protection against corrosion, salts, acid and alkali attack.

Technical Data Sheet

ParameterValue
Product TypeOxide Converter And Anti-Corrosion Protection For Reinforcing Bars And Other Iron Or Steel Surfaces
Container Type & Size1 Litre JERRY CAN · 5 Litre JERRY CAN
ColorGrey
Consumption0.15 kg/m² per coat — 0.30 kg/m² for two coats

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • CE Marking, EN 1504-7 — Reinforcement corrosion protection. Corrosion protection tested to UNE-EN 1504-7 and EN 15183; fireproofing suitable per BS 473-7 (as stated in the Technical Bulletin).

How to Apply

How to Apply
Supplied ready to use, no mixing required. Apply two coats, the second once the first is dry to the touch (2–3 hours at 20°C). Repair mortars or other coatings may be applied 24 hours after application.

Packaging

1 Litre JERRY CAN
5 Litre JERRY CAN