Skip to content
DRIZORO
Contact Us
MaxPlug®
Concrete Repair

MaxPlug®

Quick-Setting Hydraulic Mortar For Stopping Leaks Under Pressure

Pack
  • 25 KG PAIL
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Quick-Setting Hydraulic Mortar For Stopping Leaks Under Pressure
Applications
Water Leaks Sealing, Concrete Leaks Repair
Color
Grey
Coverage
One kilogram fills about 0.615–0.620 litre of cavity (approx. 1.62 kg per litre), depending on the amount of mixing water.

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxPlug® is a quick-setting cement-based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry. It is non-shrink and sets within three to five minutes depending on the temperature. Once MaxPlug® sets, it
adheres perfectly to the substrate. It only requires water for mixing.

Technical Data Sheet

ParameterValue
Product TypeQuick-Setting Hydraulic Mortar For Stopping Leaks Under Pressure
Container Type & Size25 KG PAIL
ColorGrey
ConsumptionOne kilogram fills about 0.615–0.620 litre of cavity (approx. 1.62 kg per litre), depending on the amount of mixing water.

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • CE Marking, EN 998-1 — Industrial mortar for rendering and plastering, general purpose (GP).

How to Apply

How to Apply
Clean the crack or fissure and open it to a minimum depth of 4 cm and a width of 3–4 cm, avoiding a V shape. Dampen the surface if no water is present. Add clean water slowly — about 0.28 litre per kilogram — and mix with a trowel to a mortar consistency. Mix only the quantity that can be applied immediately: form the material into a plug shape and, once it starts to warm, press it firmly and without friction into the crack or hole, holding it in place for about 2 minutes until it hardens; setting takes 3–5 minutes depending on temperature.

Packaging

25 KG PAIL