Skip to content
DRIZORO
Contact Us
Concreseal® TOP
Decorative & Finishing Systems

Concreseal® TOP

Single Layer Mortar For Facade Coating

Pack
  • 25 KG BAG
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Single Layer Mortar For Facade Coating
Applications
Facades Waterproofing, Facades Decorative Finish
Color
Grey / White
Coverage
1.3–1.5 kg/m² per mm of thickness depending on the version: TOP-F 1.5 · TOP-P 1.25 · TOP-R 1.4 kg/m² per mm. Thickness per layer: 10–15 mm for TOP-F and TOP-R, and 10–12 mm for TOP-P.

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

Concreseal® TOP is a Waterproof coloured cement based mortar with good adhesion, for the protection and decoration of façades. available in three different types depending on the final finish.

Technical Data Sheet

ParameterValue
Product TypeSingle Layer Mortar For Facade Coating
Container Type & Size25 KG BAG
ColorGrey / White
Product Color OptionsIvory / Sand / Cream / Tile / Dark Grey / Light Brown / Other colours upon special request
Consumption1.3–1.5 kg/m² per mm of thickness depending on the version: TOP-F 1.5 · TOP-P 1.25 · TOP-R 1.4 kg/m² per mm. Thickness per layer: 10–15 mm for TOP-F and TOP-R, and 10–12 mm for TOP-P.

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • CE Marking, EN 998-1 — Rendering and plastering mortar. Test standards: EN 1015-10 · EN 1015-11 · EN 1015-12 · EN 1015-18 · EN 1015-19 · EN 1015-21 · EN 13501-1 (reaction to fire).

How to Apply

How to Apply
The substrate must be sound, firm and rough, free of paint, efflorescence, loose particles, grease, release oils, dust and plaster; prepare by sandblasting or high-pressure water, and roughen smooth surfaces by chipping or scraping. Mix a 25 kg bag with clean water according to the version (TOP-F: 4.0–5.0 L mechanically / 4.5–5.5 L manually · TOP-P: 6.5–7.5 / 7.0–8.0 L · TOP-R: 4.5–5.5 / 5.0–6.0 L) using a low-speed electric drill (400–600 rpm) fitted with a mixing paddle for about 4–5 minutes. Apply manually with a trowel or by spraying with an appropriate machine; pot life approx. one hour. Cure for at least 7 days at 20 °C and 50 % R.H.

Packaging

25 KG BAG