Skip to content
DRIZORO
Contact Us
Waterproofing Systems

MaxElastic®

Waterproof Elastic Single Component Coating For All Types Of Roofs

Pack
  • 25 KG PAIL
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Waterproof Elastic Single Component Coating For All Types Of Roofs
Applications
Roofs Waterproofing, Roofs Protection
Color
Grey
Coverage
2.0–3.0 kg/m² applied in two coats, depending on surface porosity and application method.

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxElastic® is a waterproof elastic acrylic based coating, specially formulated for all types of roofs. It is supplied in the form of a water based, one-component thixotropic paste, ready to use. Once polymerised it is transformed into an UV rays resistant and non degradable elastomeric membrane, providing a crack-bridging, protective and 100% waterproof coating.

Technical Data Sheet

ParameterValue
Product TypeWaterproof Elastic Single Component Coating For All Types Of Roofs
Container Type & Size25 KG PAIL
ColorGrey
Product Color OptionsWhite / Green / Red / Black / Tile
Consumption2.0–3.0 kg/m² applied in two coats, depending on surface porosity and application method.

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • CE Marking, ETAG 005 — Liquid applied roof waterproofing kit (ETA-07/0242). Test standards: UNE-EN 1187 (external fire performance, Broof t1) · UNE-EN 13501 (reaction to fire) · UNE-EN 1931 (water vapour resistance) · EN-ISO 527-3 (tensile strength and elongation at break) · EOTA TR-003 (watertightness) · TR-004 (adhesion) · TR-008 (resistance to fatigue movements).

How to Apply

How to Apply
Stir thoroughly before use. Apply by brush, roller or airless spray in two thick coats at right angles to each other, allowing 5–18 hours drying between coats.

Packaging

25 KG PAIL