Skip to content
DRIZORO
Contact Us
MaxElastic® PUR HW
Waterproofing Systems

MaxElastic® PUR HW

Elastomeric, Water-Based, Hybrid Polyurethane Membrane For Waterproofing Of Roofs And Outdoor Areas

Pack
  • 25 KG PAIL
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Elastomeric, Water-Based, Hybrid Polyurethane Membrane For Waterproofing Of Roofs And Outdoor Areas
Applications
Roofs Waterproofing, Outdoor Areas Waterproofing
Color
Grey
Coverage
As a single waterproofing membrane: 0.8–1.0 kg/m² per coat — 1.6–2.0 kg/m² in two coats. Roof waterproofing to ETAG 005: 1.0 kg/m² per coat, total 2.0 kg/m² in two coats (W2) or 3.0 kg/m² in three coats (W3). On facades and walls: 0.25–0.30 kg/m² per coat — total 0.50–0.60 kg/m².

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxElastic® PUR HW is a one-component, water-based, hybrid polyurethane resin, that once applied provides an elastomeric and continuous waterproofing membrane, UV stable and water ponding resistant, suitable for all type of roofs and outdoor areas.

Technical Data Sheet

ParameterValue
Product TypeElastomeric, Water-Based, Hybrid Polyurethane Membrane For Waterproofing Of Roofs And Outdoor Areas
Container Type & Size25 KG PAIL
ColorGrey
Product Color OptionsWhite / Green / Red / Black / Tile
ConsumptionAs a single waterproofing membrane: 0.8–1.0 kg/m² per coat — 1.6–2.0 kg/m² in two coats. Roof waterproofing to ETAG 005: 1.0 kg/m² per coat, total 2.0 kg/m² in two coats (W2) or 3.0 kg/m² in three coats (W3). On facades and walls: 0.25–0.30 kg/m² per coat — total 0.50–0.60 kg/m².

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • CE Marking, EN 1504-2 — Polyurethane coating for protection of concrete, Coating (C).
  • Principles/Methods: 1-PI/1.3, 2-MC/2.2
  • CE Marking, ETAG 005 Part 6 — liquid applied roof waterproofing kit, ETA 16/0731. Classification: W2/W3 · zone S · P3 · S1 · TL4 (-30 °C) · TH4 (90 °C)
  • EN ISO 7783 (Class I) · EN 1062-6 · EN 1062-7 (crack bridging A3; A5 with veil) · EN 1542 · EN ISO 868 · ASTM D-412 / D-624 / D-4541

How to Apply

How to Apply
All substrates must first be primed with the water-based epoxy primer MAXEPOX® PRIMER-W at 0.20–0.30 kg/m² per coat, left to dry tack-free for 12–24 hours. Supplied ready to use: stir for 2–3 minutes with a slow-speed drill (300–400 rpm) until uniform in colour. Apply by roller, stiff hairbrush or airless spray in two crossed coats, allowing 6–10 hours drying between coats. Reinforce cold joints, non-active cracks and detail points by embedding a 10–20 cm strip of DRIZORO® MESH 58 glass-fibre mesh in the fresh first coat and covering it with the second. Substrate moisture must stay below 10 % and application temperature above 5 °C. Cure 1 day before pedestrian traffic and 7 days before the flooding test.

Packaging

25 KG PAIL