Skip to content
DRIZORO
Contact Us
MaxPatch® Pool
Decorative & Finishing Systems

MaxPatch® Pool

Decorative Cement Mortar With Exposed Colour Quartz Aggregates For Finishing Swimming-Pools And Floors

Pack
  • 25 KG BAG
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Decorative Cement Mortar With Exposed Colour Quartz Aggregates For Finishing Swimming-Pools And Floors
Applications
Swimming Pools Decorative Finish, Fountains Decorative Finish
Color
Pearl Grey
Coverage
9.5 kg/m² for a 5 mm thick layer (approximately 1.9 kg/m² per mm of thickness).

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxPatch® Pool is a one-component mortar composed of cements, pure silica, and colour quartz aggregates with special additives, designed for finishing and decoration of swimming-pools,
fountains and artificial lakes. Once applied, it provides a monolithic, mineral, and natural finish of the swimming-pool with colour quartz exposed, available in several colours. Allows application also on pavements and concrete floors as a monolithic cementitious terrazzo finish, either with polished smooth finish or by washed terrazzo technique with anti-slip textured finish.

Technical Data Sheet

ParameterValue
Product TypeDecorative Cement Mortar With Exposed Colour Quartz Aggregates For Finishing Swimming-Pools And Floors
Container Type & Size25 KG BAG
ColorPearl Grey
Product Color OptionsSplashed Blue / Splashed Green / Splashed Brown / Granite Grey / Desert Sand / Beach Ivory / Venetian Pink / Sea Blue
Consumption9.5 kg/m² for a 5 mm thick layer (approximately 1.9 kg/m² per mm of thickness).

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • No CE marking is declared in the Technical Bulletin; a Declaration of Performance to EN 998-1 (rendering and plastering mortar, GP) is published on the website. Performance verified to: EN 1015-10 (density) · EN 1015-11 (compressive and flexural strength) · EN 1015-12 (adhesion on concrete) · EN 13501-1 (reaction to fire, Euroclass A1).

How to Apply

How to Apply
Saturate the sound, clean substrate with water and remove any standing water. Mix mechanically with clean water until homogeneous. Apply by trowel or spray in an even layer and finish with a float. Expose the coloured quartz by washing and brushing at initial set, or by a controlled acid wash once fully set.

Packaging

25 KG BAG