Skip to content
DRIZORO
Contact Us
MaxEpox® Primer W
Waterproofing Systems

MaxEpox® Primer W

Water-Based Epoxy Primer For Polyurethane, Polyurea And Epoxy Coating Systems

Pack
  • Two ComponentsA: 10 KG PAILB: 20 KG PAIL
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Water-Based Epoxy Primer For Polyurethane, Polyurea And Epoxy Coating Systems
Applications
Primer For New Substrates, Primer For Existing Substrates
Color
Grey
Coverage
0.20–0.30 kg/m² per coat. Highly porous substrates may require two or three coats.

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxEpox® Primer W is a two-component, water-based epoxy formulation, designed as primer for polyurethane, polyurea and epoxy coatings to be applied on concrete, mortar, metal substrates, etc in execution of waterproofing and flooring jobs.

Technical Data Sheet

ParameterValue
Product TypeWater-Based Epoxy Primer For Polyurethane, Polyurea And Epoxy Coating Systems
Container Type & SizeTwo-component A: 10 KG PAIL B: 20 KG PAIL
ColorGrey
Consumption0.20–0.30 kg/m² per coat. Highly porous substrates may require two or three coats.

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • CE Marking, EN 1504-2 — Epoxy primer for epoxy, polyurethane and polyurea systems.
  • Technical Bulletin No. 372.01 · Mixing ratio A:B = 5:1 by weight

How to Apply

How to Apply
Premix each component separately, then pour the whole of component B into component A and mix with a low-speed drill (300–400 rpm maximum) for 2–3 minutes until uniform in colour. Apply by short-hair roller, brush or airless spray onto a sound, clean, slightly textured substrate; surface moisture up to 10 % is acceptable but not free standing water. Pot life is about 2 hours at 20 °C. Allow 12–24 hours until fully dry and tack-free before applying the epoxy, polyurethane or polyurea coating. Do not apply below 10 °C.

Packaging

Two-component A: 10 KG PAIL B: 20 KG PAIL