Skip to content
DRIZORO
Contact Us
MaxElastic® Stone
Waterproofing Systems

MaxElastic® Stone

Abrasion Protective Coating For Surfaces Waterproofed With MaxElastic®

Pack
  • 25 KG PAIL
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Abrasion Protective Coating For Surfaces Waterproofed With MaxElastic®
Applications
MaxElastic® Protection, Pedestrian Traffic Protection
Color
Grey
Coverage
1.7 kg/m² per mm of thickness — approx. 3.4–5.1 kg/m² for the recommended thickness of 2–3 mm, depending on substrate texture and porosity.

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxElastic® Stone is a mixture of water based acrylic resins and fine graded aggregates. It is a synthetic mortar ready to be used as wear protection over surfaces waterproofed with MaxElastic® This application will protect against damage caused by pedestrian and vehicle traffic. Spread by trowel, to provide a continuous and decorative coating.

Technical Data Sheet

ParameterValue
Product TypeAbrasion Protective Coating For Surfaces Waterproofed With MaxElastic®
Container Type & Size25 KG PAIL
ColorGrey
Product Color OptionsWhite / Green / Red / Tile / Black
Consumption1.7 kg/m² per mm of thickness — approx. 3.4–5.1 kg/m² for the recommended thickness of 2–3 mm, depending on substrate texture and porosity.

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • No CE marking is declared in the Technical Bulletin. Performance verified to: ISO 1675 (density) · UNE-ENV 12633 (slip resistance) · ASTM D-4060 (Taber abrasion resistance).

How to Apply

How to Apply
Remove poorly adhered coatings, grease, dust and efflorescence; roughen smooth surfaces by sandblasting or high-pressure water, and repair defects with a structural mortar. Stir the content of the drum with a clean, dry tool or mechanically with a mixing disc at low speed (300–400 rpm). Apply by trowel, rubber squeegee or airless spray in one coat of 2–3 mm; if an additional coat is needed, apply it within 5–18 hours depending on ambient conditions. Do not apply if rain is expected within 24 hours. Allow a minimum curing time of 7 days at 20 °C and 50 % R.H. before watertightness testing.

Packaging

25 KG PAIL