
Find the right product for your project

Cement-Based Waterproof Coating With Crystallisation And Osmotic Properties
Presented by FIAN GROUP within the scope of its commercial relationship with DRIZORO. Please refer to the official technical specifications and application guidelines before use. Legal Disclaimer
MaxSeal® Super is a special waterproofing coating made of a mixture of cements, carefully controlled aggregates and special organic and inorganic additives. Its special formula improves
the osmotic effect of the application allowing the penetration in the concrete through its capillary system.
The product crystallises inside sealing, waterproofing and protecting the concrete structure. It has been designed to be applied on fresh or cured concrete, pre-cast concrete, concrete blocks, cement plasters but also suitable on bricks and masonry.
Technical Data Sheet
| Parameter | Value |
|---|---|
| Product Type | Cement-Based Waterproof Coating With Crystallisation And Osmotic Properties |
| Container Type & Size | 25 KG BAG |
| Color | Grey |
| Consumption | By coating: 1.0–1.5 kg/m² per coat — 2.0–3.0 kg/m² in two coats. By dry dusting on slabs: 1.5–2.5 kg/m², increasing by 20–25% on heavily reinforced slabs. |
Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.
Reference Standards

Liquid Admixture To Improve Bonding, Workability And Curing Of Mortar And Concrete
View Product