Skip to content
DRIZORO
Contact Us
MaxSeal® Super
Cementitious Waterproofing

MaxSeal® Super

Cement-Based Waterproof Coating With Crystallisation And Osmotic Properties

Pack
  • 25 KG BAG
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • SASO Quality Mark
  • Building Sustainable Future
Type
Cement-Based Waterproof Coating With Crystallisation And Osmotic Properties
Applications
Water Retaining Structures Waterproofing, Dams Waterproofing
Color
Grey
Coverage
By coating: 1.0–1.5 kg/m² per coat — 2.0–3.0 kg/m² in two coats. By dry dusting on slabs: 1.5–2.5 kg/m², increasing by 20–25% on heavily reinforced slabs.

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxSeal® Super is a special waterproofing coating made of a mixture of cements, carefully controlled aggregates and special organic and inorganic additives. Its special formula improves
the osmotic effect of the application allowing the penetration in the concrete through its capillary system.
The product crystallises inside sealing, waterproofing and protecting the concrete structure. It has been designed to be applied on fresh or cured concrete, pre-cast concrete, concrete blocks, cement plasters but also suitable on bricks and masonry.

Technical Data Sheet

ParameterValue
Product TypeCement-Based Waterproof Coating With Crystallisation And Osmotic Properties
Container Type & Size25 KG BAG
ColorGrey
ConsumptionBy coating: 1.0–1.5 kg/m² per coat — 2.0–3.0 kg/m² in two coats.
By dry dusting on slabs: 1.5–2.5 kg/m², increasing by 20–25% on heavily reinforced slabs.

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • CE Marking, EN 1504-2 — Mortar for protection of concrete, Coating (C).
  • Suitable for contact with drinking water.

How to Apply

How to Apply
Mix with clean water until a smooth, lump-free paste is obtained, let it rest for 5 minutes, remix briefly, then apply in two crossed coats by brush, roller or spray. It may also be dusted onto slabs and then power trowelled.

Packaging

25 KG BAG