Skip to content
DRIZORO
Contact Us
MaxElastic® PAV
Waterproofing Systems

MaxElastic® PAV

Single Component, Elastic Waterproof Coating For Roofs And Terraces With Light Traffic

Pack
  • 25 KG PAIL
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Single Component, Elastic Waterproof Coating For Roofs And Terraces With Light Traffic
Applications
Roofs Waterproofing, Terraces Waterproofing
Color
Grey
Coverage
2.0 kg/m² per mm of thickness — approx. 2.0–4.0 kg/m² for the recommended thickness of 1–2 mm. Consumption may vary depending on porosity and substrate conditions; an on-site test is recommended.

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxElastic® PAV is a waterproof coating specially formulated for waterproofing all types of roofs, that are going to be subjected to light traffic. It is supplied as a thixotropic paste, with light aggregates and fibres, which once polymerised is transformed into a non degradable elastomer, providing complete waterproofing.

Technical Data Sheet

ParameterValue
Product TypeSingle Component, Elastic Waterproof Coating For Roofs And Terraces With Light Traffic
Container Type & Size25 KG PAIL
ColorGrey
Product Color OptionsTile / White / Red / Green / Black
Consumption2.0 kg/m² per mm of thickness — approx. 2.0–4.0 kg/m² for the recommended thickness of 1–2 mm. Consumption may vary depending on porosity and substrate conditions; an on-site test is recommended.

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • No CE marking is declared in the Technical Bulletin. Performance verified to: ASTM D 4060 (Taber abrasion resistance — wear index).

How to Apply

How to Apply
Remove dirt, paint residues, gypsum, efflorescence, grease, oils and de-moulding agents, and repair surface defects with a repair mortar. Stir the content of the packaging with a clean tool until a homogeneous paste is obtained. On porous substrates apply a primer coat of the product diluted with 20–30 % of water. Apply by trowel or squeegee in layers of 1–2 mm, smoothing the finish with the trowel; waiting time between layers is 5–18 hours depending on ambient conditions. Clean tools with water immediately after use.

Packaging

25 KG PAIL