Skip to content
DRIZORO
Contact Us
Decorative & Finishing Systems

MaxLevel® Decor

Quick-Setting, Cement-Based Self-Levelling Mortar For Leveling And Decorative Finishing Of Indoor Concrete Pavements

Pack
  • 25 KG BAG
Quality Certifications
  • CE
  • EPD - Environmental Product Declaration
  • Building Sustainable Future
Type
Quick-Setting, Cement-Based Self-Levelling Mortar For Leveling And Decorative Finishing Of Indoor Concrete Pavements
Applications
Indoor Flooring Levelling, Indoor Flooring Smoothing
Color
Grey
Coverage
1.6 kg/m² per mm of thickness, applied as a neat (pure) coat.

Request Sample

Select up to 3 samples

Select Sample (Max 3) *

Product Description

MaxLevel® Decor is a one-component self-levelling mortar, pigmented, based on polymer-modified cement, special additives and selected aggregates. Once mixed only with water, MAXLEVEL® DECOR provides a mortar with an extraordinary fluidity suitable for repair and finishing of indoor concrete decorative pavements in thickness between 4-10 mm.

Technical Data Sheet

ParameterValue
Product TypeQuick-Setting, Cement-Based Self-Levelling Mortar For Leveling And Decorative Finishing Of Indoor Concrete Pavements
Container Type & Size25 KG BAG
ColorGrey
Product Color OptionsLight Grey / Medium Grey / Dark Grey / White / Ivory / Sand / Other colours upon special request
Consumption1.6 kg/m² per mm of thickness, applied as a neat (pure) coat.

Note: The consumption and mixing ratios stated herein are nominal values determined under the manufacturer's recommended ideal conditions (20 °C and 50 % R.H.). Actual values may vary depending on ambient temperature, the pot life of the mix, the mixing tools and equipment used, the nature, condition and temperature of the substrate, the complementary practices adopted in the local market, and on-site trials according to each project's conditions and requirements. A preliminary on-site test prior to full application is always recommended.

Reference Standards

  • CE Marking, EN 13813 — Screed material. Test standards: EN 13892-2 (compressive and flexural strength) · EN 13892-4 (wear resistance) · EN 13892-8 (adhesion) · EN ISO 6272 (impact resistance) · EN 13501-1 (reaction to fire).

How to Apply

How to Apply
The substrate must be structurally sound and free of contaminants; open and repair all voids, holes, cracks or other defects deeper than 8 mm. Mix a 25 kg bag with about 4.5 litres of clean water (18 % by weight) using a slow-speed drill (400–600 rpm) fitted with a disc mixer for about 1–2 minutes. Apply in a single step with a rubber squeegee or toothed trowel at 4–10 mm thickness. Allow a minimum curing time of 24 hours at 20 °C and 50 % R.H.; pedestrian traffic is permitted after 24 hours.

Packaging

25 KG BAG